PIKE ARMS®
RECOIL GUIDE ROD
  ** C - CLIPPED **

- STAINLESS STEEL
- CNC PRECISION MACHINED
- EASILY DISASSEMBLE YOUR RECOIL SPRING ASSEMBLY

PIKE ARMS® STAINLESS STEEL CNC MACHINED RECOIL GUIDE ROD ** C- CLIPPED ** FOR RUGER® 10/22®

The Pike Arms® STAINLESS STEEL RECOIL SPRING GUIDE ROD is precision CNC machined for smooth trouble free operation and features our exclusive "C" clip retainer so you can assemble and disassemble the rod assembly as required without having to try to tap a roll pin in and out each time or grind the Ruger factory crimped rod.  The Recoil Guide Rod ships as an assembly with the C-clip installed. 

For custom rifle and pistol builds, the STAINLESS STEEL RECOIL SPRING GUIDE ROD is an inexpensive upgrade from standard Ruger® factory recoil guide rods and provides the ability to easily disassemble the charging handle assemble for cleaning or to install an alternate force recoil spring. 

Note:  During the course of assembly and disassembly, and especially after many uses, its possible that the the C-clip will become fatigued and could unintentinally pop off of the recoil rod and like most small pieces, it can be very difficult to find.  We recommend having a couple additional C-clips on hand just in case since the shipping on additional clips makes ordering just C-clips cost prohibitive.  Additional clips are inexpensive and are available as our part # 07381.

Review This Product

PROP 65 WARNING: This product can expose you to chemicals including lead, which are known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.