PIKE ARMS®
EXTENDED REVERSIBLE 1/2" HEIGHT
PICATINNY SCOPE RAIL
FOR RUGER® 10/22 FACTORY RECEIVERS
- 6x48 Installation Screws Included (4)
- Anodized Finish
Expand the functionality of your 10/22® rifle with a true Picatinny rail for mounting professional rings and optics usually reserved for higher priced firearms platforms. The The Pike Arms® 1/2" Reversible and Extended Picatinny Rail for Ruger® 10/22® factory receivers is precision CNC machined in the USA from billet aircraft grade aluminum (not an extrusion or a forging) and professionally anodized for a durable finish. It is available in multiple colors and finishes to match your gun (subject to availability).
At one half inch height, this Pike Arms® 1/2" Reversible and Extended Picatinny Rail for Ruger® 10/22® factory receivers is slightly higher than a traditional
3/8 inch high rail and will accomodate scopes with larger objectives
that are usually reserved for centerfire rifle use. Now with this
taller half inch high picatinny rail, you can successfully mount and use
your larger objective centerfire optics on your 10/22 rifle.
Extremely large optics may however require even greater height which can
be achieved with our 3/4 INCH HEIGHT REVERSIBLE PICATINNY
RAIL (Part #00000) while traditional optics will be better suited for
our 3/8" standard height picatinny rail (Part #00000).
The Pike Arms® 1/2" Reversible and Extended Picatinny Rail for Ruger® 10/22® factory receivers provides greater forward eye relief for larger optics and is precision machined to mirror the profile of the Ruger® factory receiver while simultaneously providing smooth angles to blend the rail into the receiver. The rail can also be installed in a reverse pattern to allow shorter scope eye relief for junior shooters with no modifications to the rail or receiver. So whether your application requires long or short eye relief, this REVERSIBLE SCOPE RAIL provides the versatility for both lengths of eye relief.
The Pike Arms® 1/2" Reversible and Extended Picatinny Rail for Ruger® 10/22® factory receivers is countersunk for attachment to your receiver using the four supplied 6-48 cap screws. Additional
6-48 CAP SCREWS are also available separately should they be required in the future or for other projects. Factory tapped receivers require no gunsmithing or fitting and can be easily user installed in minutes.
If you don't require a REVERSIBLE PICATINNY SCOPE RAIL, we offer a variety of models for every application and budget. Refer to the "RELATED PRODUCTS" section for this product for other offerings.
FEATURES:
This product can expose you to chemicals including lead, which are known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov. 
