Attention

  • HEAVY ITEM _ NOT ELIGIBLE FOR FREE SHIPPING

QPQ BLACK NITRIDE STAINLESS 1:16 TWIST 12.5" FINNED FACTORY TAPER THREADED 1/2-28 TPI REPLACEMENT BARREL FOR 10/22® SBR WITH THREAD PROTECTOR

QPQ BLACK NITRIDE STAINLESS 1:16 TWIST 12.5" FINNED FACTORY TAPER THREADED 1/2-28 TPI REPLACEMENT BARREL FOR 10/22® SBR WITH THREAD PROTECTOR

For the ultimate in appearance and performance, our STAINLESS STEEL 1:16 TWIST FINNED RUGER 10/22 BARREL is the perfect match to dress up your rifle. The barrel is professionally CNC machined to provide deep cooling grooves from the receiver to the barrel band for an appearance that is similar to a Thompson or a Reising machine gun. No other upgrade for your 10/22 looks as good and is as functional as this FINNED barrel. To make it even better, this factory taper replacement barrel is professionally CNC threaded 1/2x28 TPI (.400 length of thread) and comes WITH the thread protector.  The barrels are perfect for any 1/2x28 threaded suppressor or accessory.

The barrels are US Certified stainless steel and are QPQ Black Nitride finish. The barrels are 1:16" twist, which is perfect for standard or high velocity ammo.    The barrels do not have any iron sights installed and are designed to be used with a receiver mounted scope or similar optics.  Installation is fast and easy with no modifications to your rifle.  Simply remove the stock, unscrew the 2 cap screws that hold the barrel in, remove your factory barrel and install this new one.

Note that the Aguila HEAVY 60 grain bullet will most likely not stabilize in this barrel any more than it would in a factory 1:16" twist Ruger 10/22 barrel.  For specifically shooting 60 grain Agila bullets, use our 1:9 twist barrels, available in either stainless or blue in heavy barrel or taper barrel configurations.

  • PRODUCT NAME QPQ BLACK NITRIDE STAINLESS 1:16 TWIST 12.5" FINNED FACTORY TAPER THREADED 1/2-28 TPI REPLACEMENT BARREL FOR 10/22® SBR WITH THREAD PROTECTOR
  • MANUFACTURER Pike Arms Inc.
  • CALIBER .22LR
  • APPLICATION Ruger 10/22 SBR (Short Barrel Rifle), TAPER BARREL STOCK
  • RIFLING TWIST 1:16 - One Turn In 16 Inches
    Standard for 34 Grain Ammunition
  • LENGTH 12.5" OAL
  • WEIGHT 1.3 Pounds / 1 lb 5 oz
  • CONSTRUCTION Stainless Steel
  • FINISH QPQ Black Nitride
  • MUZZLE THREAD PITCH 1-2x28 TPI x .400 Length Of Thread
    CNC Threaded On Centers for Alignment Concentricity
  • THREAD PROTECTOR Included Standard
  • CHAMBER SPECIFICATION "Sporter" Chamber
  • ACCURACY SPEC Ruger Factory Barrel Performance or Better
  • RECEIVER ATTACHMENT Ruger V-Block With Two Cap Screws (Not Included)
  • SIGHTS Rear - None
    Front - None
    Not Dovetail Cut - Use With Scope on Receiver

Review This Product

PROP 65 WARNING: This product can expose you to chemicals including lead, which are known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.