Restricted item

Checking...

Yes... We can ship this to {{ stateToCheck }}.

No... We cannot bill or ship this to {{ stateToCheck }}.

Invalid request or service not available. Please try again.

AR15/M16 FAKE SUPPRESSOR
(DISPLAY SILENCER)
THREADED 1/2x28 TPI

Want the suppressor look and feel for your AR15 without all the paperwork hassle and transfer tax expenses? Our  AR15/M16 FAKE SUPPRESSOR is as close to a real suppressor as you can get without paying the tax stamp. Its CNC precision machined from solid aircraft grade aluminim with a durable cerakote finish and is professionally laser engraved identically to our real NFA registered suppressors.

Since its a fake suppressor, the sound is not reduced and bullet impact is not changed. Although, many customers do prefer the weight and balance improvement that the suppressor provides. Its perfect for use on an AR15 that is threaded 1/2x28 in place of the traditional flash hider.    Of course it will also work on any other .223/5.56 firearm that has the barrel threaded 1/2x28 TPI.

Don't let the low price fool you... We are the source and manufacture 1000's of fake suppressors to supply other major manufacturers, distributors and resellers. You won't find a better fake suppressor at ANY price. 

Order today and get your gun lookin' right!

 

Ordering Restrictions: No sales to CA or where otherwise prohibited. A pistol with a threaded barrel in CA would be a restricted Assault Weapon and is prohibited.

Note: Due to the thread timing relationships between the AR15 threaded barrel and the fake suppressor, the position of the engraving on the fake suppressor when screwed on will randomly stop at any position. Although it has rarely been an issue, we have no way to determine where the engraving will stop on your gun. The engraving can be oriented at any position with the use of a standard AR15 crush washer, which is not included.

Of course the AR15 that is shown is for reference only and is not included.

  • PRODUCT NAME AR15/M16 .223 FAKE SUPPRESSOR (FAKE SILENCER)
  • MANUFACTURER Pike Arms Inc.
  • CALIBER .223 / 5.56
  • APPLICATION .223 / 5.56 Handguns or Rifles Threaded 1/2-28
  • MARKING Laser Engraved
  • DIMENSIONS 5.500 Inches Long x 1.250 Diameter
  • WEIGHT 8.3 Ounces
  • FINISH Blasted, Cerakote
  • THREAD PITCH 1/2-28 TPI Female
  • RESTRICTIONS Although not federally restricted, not for sale where locally restricted or otherwise regulated. Verify state and local regulations and restrictions, if any, prior to ordering.

Overall Rating: 5 out of 5 3 reviews

Review This Product

By Chip Of Florida
Real enough looking to get you stopped means that it looks VERY real. The range officer at out local range told me I couldn't shoot with a suppressor since its against the rules (very stupid rule). So I tell him its not a real suppressor and he says I still can't shoot with it! I tell him it a "barrel extension" that looks like a suppressor and he walks with me to my shooting position to hear a shot fired. Of course it was regular loud and he says he will allow it THIS TIME! If you want one that looks real I can recommend this one.
By Travis Of Florida
WOW!! it helps with balance and aim , just the view of it makes the gun seem so much more solid , I cant belive the quality and realizm of this fake silencer AMAZING!!! got my vote thanks
By Eddie Of New York
Awesome product. Wanted the look of an SBR while abiding to NY laws. Cut my barrel down and spot welded this sucker on. I cant shoot this gun without getting complements on how good it looks.

Frequently Asked Questions For

AR15/M16 FAKE SUPPRESSOR
(DISPLAY SILENCER)
THREADED 1/2x28 TPI

  1. Does this fake suppressor come apart? Can I break the welds, cut it open etc? Can this fake suppressor be disassembled for cleaning? Do the endcaps come off? Etc Etc...
  2. What is the difference between a real suppressor and a fake suppressor?
  3. Can this fake suppressor easily be converted to a real suppressor?
  4. Can anyone legally own a fake suppressor?
  5. Can I shoot my fake suppressor on a fully automatic firearm?
  6. Will the fake suppressor affect my accuracy?
  7. Can I shoot my fake suppressor on multiple 5.56 / .223 firearms including rifles and handguns?
  8. The fake suppressor looks great, but how can you sell it so inexpensively compared to other companies?
  9. Can I send Tactical Innovations my gun(s) / barrel(s) to thread?
  10. Can I use a muzzle nut coupling instead of threading my barrels for use with my fake suppressor?
  11. Can I get a fake suppressor with custom engraving?
  12. Are your fake suppressors available in additional colors other than black?
  13. When I screw the fake suppressor onto the firearm, why does the writing stop at the bottom / side / etc rather than on the right side like in the picture?
  14. Can I shoot calibers other than .223 through it?
  1. Does this fake suppressor come apart? Can I break the welds, cut it open etc? Can this fake suppressor be disassembled for cleaning? Do the endcaps come off? Etc Etc...
    This FAKE suppressor can NOT be disassembled for any reason. It's solid. If it could be disassembled, it would be too easy for criminals to illegally attempt to construct an unregistered illegal suppressor. As a result, ATF would not allow the sale of a fake suppressor that could be disassembled.
  2. What is the difference between a real suppressor and a fake suppressor?
    Fake suppressors are the same as a barrel extensions. Since they don't make the shooting any quieter, they are not federally restricted. A real suppressor actually decreases the sound of the firearm when discharged and is therefore subject to ATF regulations.
  3. Can this fake suppressor easily be converted to a real suppressor?
    Of course not... Suppressors (silencers) are NFA restricted firearms and must transfer in strict compliance with federal, state and local regulations.
  4. Can anyone legally own a fake suppressor?
    Fake suppressors are an accessory. They are not federally restricted. Fake suppressors are the same as a barrel extension They don't make the shooting any quieter. However, state and local regulations might prohibit purchase or possession. Check state and local regulations to ensure compliance prior to ordering.
  5. Can I shoot my fake suppressor on a fully automatic firearm?
    Fake suppressors work the same on semi auto and full auto firearms.
  6. Will the fake suppressor affect my accuracy?
    The fake suppressor should have minimal to no change on the impact of the bullet as compared to shooting with no fake suppressor for general recreational target shooting. The additional weight on the barrel will change how the barrel flexes and vibrates when fired, which could minimally change your point of impact. For general plinking, just shoot it, but before using the suppressor for hunting or other "serious" target shooting, you should re-sight the firearm with the suppressor installed to compensate for any differences.
  7. Can I shoot my fake suppressor on multiple 5.56 / .223 firearms including rifles and handguns?
    Absolutely! That's one of the advantages of having a screw on fake suppressor. You can use it on any 5.56 .223 firearm that is correctly threaded 1/2 x 28 tpi.
  8. The fake suppressor looks great, but how can you sell it so inexpensively compared to other companies?
    We manufacture literally 1000s of fake suppressors in quantity runs and make our profit based on volume. We don't spend thousands of dollars on advertising and rely primarily on your satisfaction and referrals, and we pass the savings on you to. Dollar for dollar for price, performance, workmanship, customer service and company reputation, you will not find a better value for your money.
  9. Can I send Tactical Innovations my gun(s) / barrel(s) to thread?
    We currently are not taking in any barrel threading work due to peak manufacturing production demands. Most local gunsmiths aas well as machine shops should be able to correctly thread your barrel for a nominal charge. We have a list of barrel threading tips that you can provide to your gunsmith or machine shop to help ensure a perfect job.
  10. Can I use a muzzle nut coupling instead of threading my barrels for use with my fake suppressor?
    While the use a muzzle nut coupling instead of threading multiple barrels appears to be an inexpensive and fast solution to threading each barrel, the use of any muzzle nut coupling would void any factory complimentary repair work because as the bores of the barrels are drilled, the drill "walks" a little fron the starting end to the muzzle end. This means that the bore is never EXACTLY in the middle of the barrel, so if you clamp a muzzle coupling on the the barrel, the bore will be off center to the fake suppressor. Pistols have a greater possibility of successfully using a muzzle coupling since the barrels are not as long when they are drilled.
  11. Can I get a fake suppressor with custom engraving?
    We do not offer any custom engraving at this time. Your local trophy shop should be able to provide custom engraving if you need it.
  12. Are your fake suppressors available in additional colors other than black?
    Based on customer demand, black with white laser lettering is the only option available at this time.
  13. When I screw the fake suppressor onto the firearm, why does the writing stop at the bottom / side / etc rather than on the right side like in the picture?
    Although its usually not an issue, there is no way to tell where the writing will stop when its screwed on. Its random based on the multiple thread timings and where the fake suppressor was engraved. You can change where the engraving stops by putting a THIN spacer between the fake suppressor and the adapter if you prefer to have it stop in a particular position. However, we have no way to ship you a fake suppressor that will have the engraving stop in any position with any greater probability than having it stop anywhere else.
  14. Can I shoot calibers other than .223 through it?
    Although many customers have had good experiences using their fake suppressors on firearms of calibers other than .223 by using common sense and good judgment, the fake suppressor is not rated for any caliber other than 5.56 / .223. Other calibers will have varying pressures and could damage the fake suppressor and / or cause personal injury to the shooter or bystanders, and therefore their use is not recommended and they should not be used. Safe firearm handling and use would preclude the use of any firearm or suppressor with ammunition other than that for which it was designed.

INSTALLATION INSTRUCTIONS

Installation is fast and easy and requires no tools or gunsmithing.

1.  Ensure firearm is NOT loaded. 

2. Remove existing flash hider.

2. Screw 5.56 /.223 FAKE SUPPRESSOR onto firearm's existing threaded barrel.  Hand tighten until securely seated on barrel.  Do not over-torque.  Use crush washer (not supplied) to position engraving to preferred orientation if desired.

CLEANING INSTRUCTIONS

1.  Ensure firearm is NOT loaded. 

2.  Unscrew 5.56 / .223 FAKE SUPPRESSOR from firearm.

3.  Remove lead and carbon from inside of 5.56 /.223 FAKE SUPPRESSOR using pistol cleaning bush and bore cleaner. 

4.  Lightly oil exterior with soft cloth to remove dirt and dust.

PROP 65 WARNING: This product can expose you to chemicals including lead, which are known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.