If you want to get the full fun value out of your Walther P22 handgun by being able to mount any 1/2x28 TPI threaded accessories such as a SUPPRESSOR, a FLASH HIDER from an AR15 or one of our UNRESTRICTED FAKE SUPPRESSORS, then this is the part that you need. This thread adapter easily replaces the factory barrel nut using Walther's factory supplied barrel wrench and works equally well on 3.4" and 5" guns. (However, it will not work on CA non-threaded guns.)
We manufacture 1000's of Walther Thread adapters for other firearm manufacturers, national firearm wholesalers, local retail gun shops and you, our internet customers. So, don't let our low price fool you about the quality. Our professional volume manufacturing capability allows us to offer you a precision machined adapter at a price that you won't beat anywhere. Our Walther P22 Thread Adapters are CNC manufactured to precision tolerances from solid steel rod (NOT aluminum) in one CNC lathe operation to ensure exact thread alignment and are hot salt blued to match your P22 pistol. Each retail packaged adapter assembly consists of one adapter and one knurled OD thread protector. If you don't yet have a thread adapter for your P22, you're missing the best part of the gun! Order one now!
NOTE: Firearms and additional accessories are for product display and are not included with adapters.
Review This Product Close
-
JMak
Date: 12/11/2007
I agree with other posters. This is cheaper and as good or better than the ones other people sell. The knurling is flawless, it fits like a glove.
| Was this review helpful?yesno |
12 found it helpful | 0 did not |
-
Jane torelli
Date: 06/24/2007
I've had one from tactical for over 2 years and just ordered another for my new pistol. Price is right and quality is the same as everyone else. Now for another suppressor to go with it!
| Was this review helpful?yesno |
11 found it helpful | 1 did not |
-
Ben B.
Date: 05/20/2007
Excellent part, excellent quality. Works perfectly on the 3.4" replacement barrel as well as the 5" factory barrel.
Thanks!
| Was this review helpful?yesno |
12 found it helpful | 1 did not |
-
Butch R.
Date: 11/18/2006
The P22 should have come with one of these from the factory. I have a fake suppressor on mine and want to get a real one now more than ever. For now I want to see how many other cool things I can screw on to my gun.
| Was this review helpful?yesno |
12 found it helpful | 2 did not |
-
Mark B.
Date: 11/01/2005
I have a couple P22s and bought my first adapter from another company for more than double the price. I was afraid that low price meant poor quaility but its the exact same thing. I'll do business with this outfit again for sure.
| Was this review helpful?yesno |
15 found it helpful | 1 did not |
-
Herman Anderson
Date: 09/29/2005
This is a solid adapter, well made and dependable. If you're in the business you'll appreciate the quality at such a low price
| Was this review helpful?yesno |
11 found it helpful | 1 did not |
INSTALLATION INSTRUCTIONS
This WALTHER P22 THREAD ADAPTER can easily be installed on either the 3.4" gun or the 5" targer barrel.
FOR 3.4" GUNS:
1. Ensure that your pistol is NOT LOADED and that the magazine is removed.
2. Pull the slide back enough to expose the factory barrel nut. Using the factory supplied barrel nut wrench, unscrew and remove the barrel nut.
3. Use your finger in the ejection port to keep the barrel seated correctly and fully forward.
4. Replace the factory barrel nut with the P22 THREAD ADAPTER. Hand tighten and then snug using the factory barrel nut wrench. DO NOT OVER TIGHTEN.
All 1/2-28 threaded accessories can now be used on your P22 pistol.
FOR 5" GUNS:
1. Ensure that your pistol is NOT LOADED and that the magazine is removed.
2. Using the Walther supplied allen wrench, remove the fake compensator.
3. Pull the slide back enough to expose the factory barrel nut. Using the
factory supplied barrel nut wrench, unscrew and remove the barrel nut.
4. Use your finger in the ejection port to keep the barrel seated correctly and fully forward.
5. Replace the fake compensator without installing the barrel nut.
6. Continue to use your finger in the ejection port to keep the barrel seated correctly and fully forward. Screw the P22 THREAD ADAPTER on in place of the factory barrel nut. Hand
tighten.
7. Screw the fake suppressor or flash hider or any other 1/2-28 accessory onto the P22 THREAD ADAPTER and snug the adapter. DO NOT OVER
TIGHTEN.
All 1/2-28 threaded accessories can now be used on your P22 pistol.
