Tactical Innovations
SHORT ON CASH?  TRADES WELCOME!
HOME | JOIN MAILING LIST | BOOKMARK US (CTRL-D)
MY ACCOUNT | | CONTACT US
DEALER LOGIN | Not logged in
Quick Find
 
Advanced Search
All Products
CATEGORIES
MANUFACTURERS
COMBOS & DEALS
Manufacturers
Reviews more
STANDARD TRIGGER ASSEMBLY <br>WITH BILLET HOUSING FOR  10/22® <br><font color="red">STANDARD GRADE</font>
The machine work is very clean and all parts fit together pe ..
5 of 5 Stars!

STANDARD TRIGGER ASSEMBLY
WITH BILLET HOUSING FOR 10/22®
STANDARD GRADE

  • Pike Arms
RETAIL $164.99SALE $134.99

STANDARD TRIGGER ASSEMBLY WITH BILLET HOUSING FOR  10/22® 

STANDARD GRADE

Pike Arms' PRECISION MACHINED TRIGGER ASSEMBLY is CNC machined from billet T6 aircraft aluminum and provide a cost effective upgrade alternative to the current production Ruger® plastic trigger housing.  Each Precision Machined Trigger Housing comes completely assembled and ready to drop-in to your Ruger® 10/22® rifle or Charger™ pistol.

The hammer, sear and disconnector are precision EDM machined from tool steel and hardened.  The PRECISION MACHINED TRIGGER ASSEMBLY comes complete with a Pike Arms' PRECISION MACHINED TRIGGER as well as a Pike Arms' billet machined PADDLE MAG RELEASE.  Standard color combinations are shipped from stock while custom color combinations of trigger pack, trigger and mag release can be achieved by purchasing the additional part(s) in the color of your choice, and then you  can easily install them by swapping out the stock color with your desired upgrade color.

This PRECISION MACHINED TRIGGER ASSEMBLY is available in you choice of colors and is a drop-in replacement with no gunsmithing required.

* Ruger, 10/22 & Charger Are Registered Trademarks of Sturm Ruger & Co., Inc.

  • STANDARD TRIGGER ASSEMBLY WITH BILLET HOUSING FOR  10/22® STANDARD GRADE
  • STANDARD TRIGGER ASSEMBLY WITH BILLET HOUSING FOR  10/22® STANDARD GRADE
  • STANDARD TRIGGER ASSEMBLY WITH BILLET HOUSING FOR  10/22® STANDARD GRADE
  • STANDARD TRIGGER ASSEMBLY WITH BILLET HOUSING FOR  10/22® STANDARD GRADE

Overall Rating: 4.00 out of 5

Share Your Experience - Write a Review

  • Jonathan RobertsRome, GA

    Date: 06/19/2010

    Got the satin stainless housing with a satin gold trigger and i was very happy with the finish on them, looked great on my rifle, all the parts are very well made and no problems installing. trigger pull is about the same as the factory part maybe a little over 4lb like tacticalinc says. had it for a few months now and works great, overall a great product.

    Was this review helpful?yesno 47 found it helpful | 8 did not
  • Warren BlavsfordFort Wayne, IN

    Date: 05/13/2010

    The machine work is very clean and all parts fit together perfectly. The gold finish accents my rifle and is much nicer than the plastic factory part. The trigger has a very nice feature for the travel that is built into the housing rather than drilling a hole in the trigger and putting a screw through it like other manufacturers do theirs. This part is a nice upgrade to any 10/22 rifle and shipping was fast.

    Was this review helpful?yesno 48 found it helpful | 6 did not
  • Jed ShafferBloomfield, NM

    Date: 07/01/2010

    This trigger pack has it all. I was going to buy the parts one by one and assemble it myself but by the time you buy all the pieces, you might as well just but it already put together. The trigger is nice because it can adjust for travel with a set screw built into the housing which is WAY better than having a screw through the trigger the way other companys do it. You also get the paddle mag release standard with this one. I took the pack apart to check it out on the inside and all of the parts are nicely machined, not rough crap like Ruger's latest parts. My only complaint is that the trigger pull is to hard at 4 pounds but it didn;t take very long to do a trigger job on it and get it where I wanted it. The metal on the hammer and sear are nice and hard and are still holding a good edge, unlike my Ruger factory parts. Overall a nice deal for the price. I'd buy it again.

    Was this review helpful?yesno 72 found it helpful | 3 did not
  • Bob BlatzCorona, CA

    Date: 05/25/2011

    I know the description said the trigger pull was like the factory unit, but I was not expecting it to bee this poor,heavy, gritty, and creepy, with too much negative angle. This unit is safety overkill, and I wish I had never bought it. I have a xxxxxx and a xxxxxx, and these rock compared to this one.

    Was this review helpful?yesno 54 found it helpful | 47 did not

STANDARD GRADE TRIGGER ASSEMBLY WITH BILLET HOUSING FOR  10/22® - STANDARD GRADE

Thank you for your purchase of a Pike Arms® Standard Grade Trigger Assembly With Billet Machined Trigger Housing for Ruger 10/22® rifles and compatible receivers.  Our trigger housings are made in the USA using modern CNC equipment to exact tolerances to provide a part that will provide many years of functionality and pleasure and can be used as a direct replacement for Ruger factory trigger housings or can be used for custom assembled rifles. 

! SAFETY !   PLEASE ENSURE THAT YOUR FIREARM IS NOT LOADED BEFORE CONTINUING.

One difference and advantage our billet trigger housing provides is the inclusion of a trigger return spring and plunger (included standard) which allows you to adjust your trigger travel distance.  Adjustment of the trigger travel is as follows:

    Note: the safety will need to be disengaged at this time to set the over travel properly.

    Pull the trigger rearwards as far as it will go (as if pulling the trigger to shoot).  The over travel can now be precision adjusted by adjusting the setscrew depth as desired using the following guidelines: 

 - Tightening the set screw (screwing it in) too much will not allow the hammer to be released. 

 - Conversely, if you do not have the setscrew screwed in far enough, you will have excessive trigger travel and the the trigger will contact the trigger guard, resulting in finish damage to the surfaces of both the trigger and the trigger guard.

The position depth of the trigger over travel setscrew DOES NOT affect the trigger pull weight in any way.   

Reliable function and operation requires that all parts successfully work together as intended.   Most assemblies can be completed without any issues (especially when using either all Ruger® parts or all Pike Arms parts).  We do not offer assembly or trouble shooting gunsmithing services and you should seek competent professional local gunsmithing assistance should you encounter a situation that exceeds your comfort or experience level.

  • Ample StockItem is in-stock at normal level
  • Low StockItem is in-stock but in limited quantity and is anticipated to be back-ordered and out of stock in the near future
  • Out of StockItem not available, the expected delivery date will be shown if available

x


  ORDERING HELP
- General Ordering Help
- Layaway Program
- Order Tracking
- Problems With An Order?
SHIPPING & RETURNS
- Shipping Costs & Times
- Our Return Policy
- Firearm Shipping
COMPANY
- Company Information
- Security
- Employment Opportunities
- Equipment For Sale
LEGAL
- Warranty
- Limit Of Liability
- Terms Of Use
 

TACTICAL INNOVATIONS INC.
345 Sunrise Road
Bonners Ferry, ID 83805
208-267-1585 Pacific   Fax: 208-267-1597
sales@tacticalinc.com     www.tacticalinc.com
Copyright © 2015 Tactical Innovations Inc

C#96