Free shipping offer applies to non-dealer online orders with combined products totaling $150 or more excluding shipping and taxes. Free shipping offer does not apply to FFL restricted items (firearms) as well as heavy or oversize items which would require additional freight charges. Free shipping carrier and service will be selected by Tactical Innovations based on package weight, package size and shipping distance. Customer reserves the right to designate carrier and service at customer's expense.
The "Universal" Clipdraw attaches in seconds with 3M Corp. #4941 VHB
(very high bond) double coated tape. VHB tape is used in the
construction and aircraft industries as a replacement for rivets. It
provides a 20 lb. continuous bond that resists oil, solvents, heat
and vibration. Heavy recoil and rapid slide movement have no effect
on the bond strength between gun and Clipdraw. The Clipdraw stays
solidly in place with adhesion actually increasing over time. The
"Universal" Clipdraw consists of two parts. The mounting plate
attaches to the gun with the double coated tape. The clip part
screws to the mounting plate with two 1/8" button head screws.
Switching to a holster is simple.
Just remove the clip part and in most cases the gun can be holstered with the low profile mounting plate left in
place.
No need to remove and replace the tape each time.SEMI-AUTOMATICS (virtually all models) -
confirm by checking gun for required mounting space.
Mounting plate attaches on either side of the slide or frame with
VHB double sided tape.
Mounting requires just 3” x ¼” of flat surface that can include
grooved or textured areas.
Clip part screws securely to the mounting plate.
Compatible with all ambidextrous safeties and most Laser Grips