Free shipping offer applies to most retail ONLINE orders (not telephone) in the continental USA only with combined products totaling $150 or more (excluding shipping and taxes). Free shipping offer will not apply to orders that include any of: (1) FFL restricted items such as firearms and suppressors; (2) Heavy or Oversize Items; (3) HAZMAT items; (4) Atypical Items that are clearly marked in their respective product descriptions as being not eligible for free shipping. Free shipping carrier and service will be selected by Tactical Innovations and may or may not necessarily be the fastest or the customer's preferred delivery method. Customer may, at their expense, designate their preferred carrier and shipping service during checkout in lieu of this free shipping offer.
The "Universal" Clipdraw attaches in seconds with 3M Corp. #4941 VHB
(very high bond) double coated tape. VHB tape is used in the
construction and aircraft industries as a replacement for rivets. It
provides a 20 lb. continuous bond that resists oil, solvents, heat
and vibration. Heavy recoil and rapid slide movement have no effect
on the bond strength between gun and Clipdraw. The Clipdraw stays
solidly in place with adhesion actually increasing over time. The
"Universal" Clipdraw consists of two parts. The mounting plate
attaches to the gun with the double coated tape. The clip part
screws to the mounting plate with two 1/8" button head screws.
Switching
to a holster is simple. Just remove the clip part and in most cases
the gun can be holstered with the low profile mounting plate left in
place. No need to remove and replace the tape each time.
REVOLVERS (virtually all models) -
confirm by checking gun for required mounting space.>
Mounting plate attaches on the right side below the cylinder with
VHB double sided tape
Requires just 2 ¾” x ¼” of flat surface on the right side below
the cylinder
Clip part screws securely to the mounting plate
Mounts on the right side only. Left side mounting would prevent
cylinder from opening