In response to customer demand for a high quality target grade precision machined replacement receiver for building a custom 10/22 rifle at an affordable price, serious target shooters, varmit shooters, as well as plinkers can enjoy the advantages of a machined receiver that can be built into whatever level of precision is required. Our TACTICAL22 replacement receiver is loaded with the features that easily separate it from a factory receiver while still being able to use factory parts to complete it.

Ruger & 10/22 Are Registered Trademarks of Sturm Ruger
1. RECEIVER PRECISION MACHINED FROM AIRCRAFT GRADE BILLET ALUMINUM
	The TACTICAL22 Replacement 10/22 Receiver starts as a 1 1/2 pound solid billet of aircraft aluminim. Extensive CNC machining converts the solid block into a 6.4 ounce precision receiver that does not have the rougher surface finish and casting imperfections that a cast receiver would frequently include. All dimentions of the receiver are held to close tolerances for reliable consistency. We offer a variety of Ruger 10/22 Accessories to compliment your custom built rifle, such as Replacement Barrels, TI25 Machined Aluminum Mags, TI25 Advanced Composite Mags as well as Stocks and Flash Hiders.

2. CLASSIC APPEARANCE WITH NO TOP RECEIVER TAPPED HOLES
	The TACTICAL22 receiver provides precision functionality with classic asthetic appearance. Clean angles, smooth arcs and machined surfaces are not distracted by tapped holes plugged with set screws. The top of the receiver is unmodified and provides the ultimate appearance for a rifle using tradional barrel mounted iron sights.

3. CLEAN FROM THE CHAMBER TO THE MUZZLE

Target shooters have always known that the correct way to clean a rifle is from the chamber and out the muzzle rather than pushing all the dirt from the barrel into the receiver and potentially damaging the barrel crown with the cleaning rod. Our receivers have a 1/4" hole in the rear of the receiver that allows you to put a cleaning rod in the rear of the receiver, then attach the brush and swab the barrel from the chamber to the muzzle without having to remove the barrel (and loose your zero each time). The cleaning access hole is cosmetically covered with a snap in and out plug that blends with the rear of the receiver when installed and that is completely hidden when the receiver is in the stock.

4. HARD ANODIZED AND PROFESSIONALLY LASER ENGRAVED

The receiver is matte finished for durability and appearance and is professionally hard black anodized. Anodizing is not a paint or a spray on finish, its a molecular change in the surface of the aluminum that forms crystals (like diamonds) on the outside of the material. Its the same finish that space and defence contractors and the military require on their parts. To compliment the matte black anodized finish, each suppressor is professionally laser engraved in compliance with BATFE marking requirements, indicating its serial number, model and manufacturer information. Laser engraving costs a few dollars more than traditional rotary engraving, but anything less looks like it. The TACTICAL22 Receiver delivers in appearance and performance at a value cost.

5. YOUR CHOICE OF PICATINNY RAIL OR "FLAT TOP"
	For those shooters that prefer a receiver with a Picatinny rail to mount a scope or other optics, we also offer our Precision Machined Replacement 10/22 Picatinny Rail Receiver.

6. YOUR CHOICE OF ALUMINUM GRADE - 6061 OR 7075

Aluminum, like everything else, comes in different grades. 6061 T6 aluminum is the most common and is ofter referred to as "aircraft" aluminum. Applications where strength is a factor require 7075 aluminun (which is slightly harder). Based on our testing, its our conclusion that the 10/22 receiver does not have the stress that would require the more expensive 7075 aluminum. However, for shooters that prefer the additional strength, we offer the receiver in either 6061 at our standard cost or machined from 7075 for an additonal cost reflecting higher material costs, longer run times and additional tooling wear.

7. IF OUR NAME IS ON IT, WE MAKE IT AND SERVICE IT

Many other "manufacturers" put their name on a product that they don't manufacture. Our TACTICAL22 Receiver is CAD designed and CNC manufactured in our modern CNC machine shop out of USA made aluminum. We are intimately familiar with its function, assembly and operation and are committed to providing shooters with a product that meets or exceeds their expectations. We operate a fulltime firearms and related accessories CNC manufacturing machine shop with live customer service and have the parts, the staff and the experience in-house to service and troubleshoot our products, resulting in fast turnarounds and hassle free service for you, our valued customer. As always, we appreciate your business!

In our manufacturing, our designs and our customer service, we'll go the extra mile to make your purchase worth your hard earned money, both at the dealer wholesale as well as the customer retail level and we back it with our "EASY TO UNDERSTAND GUARANTEE" - If You Have No Local Stocking Dealer, Purchase One From Us And Have It Shipped To A Dealer of Your Choice In Your State. If You Don't Like Anything About It, ANYTHING, Simply Return It Prepaid Per ATF Transfer Requirements And We Will Refund Your Purchase Price (less shipping) NO QUESTIONS ASKED!

PRICE, PERFORMANCE, APPEARANCE, CUSTOMER SERVICE AND OUR SATISFACTION GUARANTEE!

If You Can't Find A Local Stocking Dealer, Purchase One From Us And Have It Shipped To A Dealer of Your Choice In Your State. We're Confident That You'll Love It! However, If You Don't Like Anything About It, ANYTHING, Simply Return It Prepaid And We Will Refund Your Purchase Price (less shipping) NO QUESTIONS ASKED! PRICE ! PERFORMANCE ! APPEARANCE ! CUSTOMER SERVICE ! And Our SATISFACTION GUARANTEE !		PRODUCT SPECIFICATIONS PRODUCT MODEL TACTICAL22 PRECISION MACHINED REPLACEMENT 10/22 RECEIVER Manufacturer Tactical Innovations Inc. Caliber Rated for .22LR Only Material 6061 or 7075 Aluminum Manufacturing Process Precision Machined From Billet Weight 6.4 Ounces Finish Matte Black, Hard Anodized Engraving Professionally Laser Engraved Per BATFE Regulations Included Accessories - Bolt Buffer PURCHASING RESTRICTIONS A RECEIVER IS A FIREARM AND MUST SHIP TO AN FFL DEALER IN YOUR STATE. RECEIVERS CAN NOT SHIP DIRECTLY TO INDIVIDUALS! SHORT ON CASH? We'll trade for, or purchase for CASH, just about ANYTHING gun related, especially interested in Military 1911 .45 Auto's, Lugers, Registered Machine Guns and Cutaways. Email what you have and what you realistically need to get out of it (instead of 'make me an offer' and back and forth, we all save time by you pricing right up front) and we'll see what we can work out. Often you'll wind up with what you need AND get cash back!

* Rifles shown are for reference only and are NOT included with the stripped receiver