PIKE ARMS®
RECEIVER CROSS PINS
.002 OVERSIZE
PRECISION GROUND & HARDENED
FOR RUGER® 10/22®

OVERSIZE RECEIVER CROSS PINS .002 OVERSIZE (PAIR) PRECISION GROUND & HARDENED FOR 10/22®

PIKE ARMS® RECEIVER CROSS PINS are precision ground and hardened dowel pins to secure the trigger assembly to the receiver for Ruger® 10/22®, and the ELITE22™ series of receivers and rifles.  If you want to tighten up your trigger group to your receiver based on anodizing tolerances, hole wear or any other factor that would make standard diamater pins too loose, then the Pike Arms® .002 OVERSIZE pins are what you need.

The PIKE ARMS® OVERSIZE RECEIVER CROSS PINS are intentionally OVERSIZE by .002.  Since the pins are oversize, we have lightly marked them with a temporary blue machinist's layout dye so you can easily tell them from any standard pins you might also have.  The blue marking is not permanent and can easily be removed by lightly polishing them or with acetone / fingernail polish remover and the marking has no effect on the size or function of the pins.  Since the pins are HARDENED, it is usually easier to fit the receiver pins to the aluminum receiver. 

For standard size Pike Arms® Receiver Cross Pins, refer to part # 00916. 

Pike Arms® Receiver Cross Pins are SOLD PER PAIR (One PAIR is required per firearm assembly). If you order quantity of 1 and you will get a pair (2) Cross Pins so you can assemble one rifle. 

Review This Product

PROP 65 WARNING: This product can expose you to chemicals including lead, which are known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.