For the most demanding and discerning suppressor customer that requires a suppressor that cuts no corners in material costs, manufacturing process or technological advantage, the QUEST suppressor delivers at a price that can only be achieved by our volume manufacturing capabilities. The entire suppressor - tube, endcaps and all baffle internals are CNC precision machined from stainless steel. For an ultra quality, premium performance suppressor, nothing else comes close. The QUEST suppressor - THE CHOICE IS EASY!

1. 100% STAINLESS STEEL CONSTRUCTION

Although traditional suppressor construction utilizing anodized aluminum is more than adequate for long suppressor service life, some customers prefer and are willing to pay for the additional strength, durabilty and life expectancy that only stainless steel construction can offer. The QUEST suppressor is 100% manufactured from stainless steel to include the tube, both endcaps and all baffles and internals. To compliment your firearm's finish as well as your shooting requirements, the Quest suppressor's all stainless construction is available in your choice of two finishes: polished stainless (standard) or high temperature matte black liquid ceramic (+$20.00 for additional prep, application and material costs).

2. PREMIUM DESIGN, MANUFACTURING AND PERFORMANCE

No machining operation was cut or in any way compromised in the manufacturing process of the QUEST suppressor. Every component in the suppressor assembly was designed first based on performance functionality and then based on minimizing weight, NOT based on manufacturing time. For instance, at considerable additional machining time and expense, each stainless steel "K" baffle in the QUEST suppressor has been additionally machined with "steps" to provide maximum surface area to increase db reduction. Additional baffle porting and vents have been machined into the baffle stack to provide peak flow performance. The result is an enhanced db reduction compared to a baffle stack using un-stepped traditional "K" baffles. For the endcaps, both have been skelatonized to maximize strength and minimize weight and both end caps have been enhanced to incorporate our proprietary 3 point lug drive disassembly method. The front endcap has been additionally machined inside and outside to provide a gas exit venturi. The sum of all the additional features, combined with its stainless steel construction, makes the QUEST suppressor truely a state of the art assembly that delivers a lightweight package with uncompromising suppression performance.

3. PELLET GUN PERFORMANCE

Do you hate earmuffs when you shoot, especially in the hot summer? Do your neighbors wish you preferred golf to target shooting? Now you can shoot .22LR ammo and have it sound like a pellet gun with our QUEST stainless steel .22LR suppressor on your rifle or handgun. The reality of current suppressor designs and manufacture is that not much is new in the world of suppressor design and most all modern suppressors us a 2 stage K baffle. The QUEST suppressor goes one step farther by adding the additional steps to each baffle (per number 2 above) resulting in enhanced db reduction compared to traditional "K" baffles. Performance in decibel reduction to the ear is comparable from one suppressor to the next. Although our meters can quantify db differences between suppressors, db measurements will vary between days, guns, ammunition etc. As a result, we build our suppressor baffle stack first based on our meter and then modify it based on human perception feedback. For instance, a slightly higher db at a different frequency might appear quieter based on the shooter's ability to hear it. Similarly, duration of peak db will have a different impression on your ear. For instance, a micro second at one db level will set a peak level on our meter (regardless of its duration), but it still sounds more quiet than 2 or 3 times the peak length of time at a slightly lower db level. Based on the wide range of differences in db data collection, data integrity and data interpretation, we do not publish meter generated db reductions (which have become somewhat of a joke in the suppressor industry). We are confident that when you shoot a QUEST suppressor, you'll agree that its performance delivers.

4. COMPLETELY DISASSEMBLE TO CLEAN OR SERVICE (By The User)

Anyone that's shot .22 rimfire ammo knows how dirty it is. In addition to the dirt, with a suppressor, every shot sends a mist of molten lead out the barrel with the bullet. When the molten lead hits the suppressor, it hardens. An ultrasonic cleaner or home brew solvent will get the carbon out of the suppressor but it will not remove the lead. We have had suppressors that ship brand new at 4.1 ounces and are returned for service at over 12 ounces based on lead build up. The ONLY way to remove lead is to disassemble the suppressor and either wire brush or bead blast it off the baffles. We continue to maintain that .22 LR suppressors have to be cleaned. Think about it? Would you expect your firearm to continue to work at its peak performance if you never cleaned it? Our QUEST suppressor, like all of our .22 LR suppressors, can be completely disassembled by the user to include the removal of both endcaps and all the internal baffles, and then cleaned and reassembled. If you also don't believe that .22LR ANYTHING can be "sealed and self cleaning", then the ability to disassemble and clean your QUEST suppressor is a feature that will keep your suppressor operating at peak performance for many years to come without costly returns to the manufacturer for service.

5. PROFESSIONALLY LASER ENGRAVED

To compliment either the polished stainless or the matte black liquid ceramic finish, each suppressor is professionally laser engraved in compliance with BATFE marking requirements, indicating its serial number, model, manufacturer and caliber. Sure laser engraving costs a few dollars more than traditional rotary engraving, but anything less looks like it costs a lot less. The QUEST suppressor delivers premium performance and appearance at a value cost.

6. CAD DESIGNED and CNC MANUFACTURED

Every piece of an QUEST suppressor is CAD designed and CNC manufactured in our modern CNC machine shop out of US certified stainless steel. The backbone of any suppressor is the baffle stack and each baffle is individually machined. There are no stamped parts, hardware store washers, screens, wipes, grease or any other parts that will wear out or have to be repetitively replaced. Our commitment to manufacturing excellence assures you consistent parts interchangeability and the finest workmanship available. We're proud of our baffle design, technology and workmanship and freely provide photographs for your review and evaluation. You wouldn't buy a car without knowing what engine was under the hood, demand the same for your suppressor.

7. MULTIPLE PLATFORM VERSITILITY

One of the major advantages of a screw on "muzzle can" suppressor compared to an integrally suppressed firearm is that it can be used on multiple firearms to best suit the requirement. The QUEST suppressor is designed for either handgun or rifle use and works well on traditional mounting platforms such as a Walther P22 or a Ruger 10/22 rifle. Use on a P22 handgun, for either the 3.4" or the 5" models, requires a WALTHER P22 THREAD ADAPTER which installs easily with no modifications to the handgun. Installation on a SIG factory threaded Mosquito requires a MOSQUITO THREAD ADAPTER which installs easily with no modifications to the handgun. Installation on 10/22 rifle requires that either the factory barrel be professionally threaded on centers or simply install one of our REPLACEMENT 10/22 THREADED BARRELS. One other advantage of a screw on suppressor is that it can be disassembled from either end by removing BOTH endcaps to drive the baffles out either end. By comparison, the suppressor on an integrally suppressed firearm (assuming the manufacturer even designed it with the capability of removing the front endcap) quickly becomes soldered together with lead from firing making it difficult, and often impossible) to pull the baffles out the front of the assembly as compared to driving them out from either end. Between the inability to use integrally suppressed suppressors on multiple firearms as well as the near impossibility of disassembling them for cleaning, we do not offer integrally suppressed firearms.

8. IF OUR NAME IS ON IT, WE MAKE IT AND SERVICE IT

Many other "manufacturers" put their name on a product that they don't build. EVERY QUEST suppressor that we sell, we make every piece of it and are intimately familiar with its function, assembly and operation. We operate a fulltime firearm CNC manufacturing machine shop with live customer service, not answering machines. We have the parts, the staff and the experience in-house to service and troubleshoot our products, resulting in fast turnarounds and hassle free service for you, our valued customer. You should expect nothing less from any other suppressor manufacturer.

9. MYTH: "IT HAS TO BE EXPENSIVE TO WORK WELL"

The truth is that suppressors don't have all that much material in them and volume production with our modern CNC lathes make manufacturing costs per unit very reasonable even with the increased costs of stainless steel construction and the associated increased machine times. We base our profit margins on volume, which means we can sell our suppressors at prices that are considerably lower than many other manufacturers' prices that produce small quantity runs or even individual "handmade pieces". Our modern CNC machines ensure the highest workmanship and consistent quality part after part. In addition to our economy of scale manufacturing volume, we do not run multiple expensive magazine ads each month and we do not print color catalogs with our suppressors surrounded by flashy artwork, both of which are expensive and the cost has to be added to the selling price of the suppressors. We bypass the expense and pass the savings on to you. Your satisfaction and referrals are our best advertising.

ADDITIONAL INFORMATION AND PRODUCT RESOURCES
QUEST FREQUENTLY ASKED QUESTIONS	QUEST CLEANING INSTRUCTIONS	SUPPRESSOR MODEL COMPARISON
STOCKING DEALER LIST	SERVICE WORK ORDER FORM	SUPPRESSOR PURCHASING GUIDELINES

PRODUCT SPECIFICATIONS
PRODUCT MODEL	QUEST STAINLESS STEEL .22LR SUPPRESSOR
Suppression Capability	Excellent
Manufacturer	Tactical Innovations Inc.
Caliber	Rated for .22LR Only See QUEST Frequently Asked Questions #13
Application	.22LR Firearms Threaded 1/2x28 tpi Male (Such As Walther P22, Ruger 10/22, etc)
ID Mounting Thread	1/2x28 TPI
Material	100% Stainless Steel (Tube, Endcaps (2) and Baffles)
Weight	7.1 Ounces
Length	5.000"
OD Dimension	1.000"
Baffle Design	Stepped, 2 Stage Ported K Baffles (stainless steel)
Endcap Design	Threaded For User Disassembly, Each End
Finish	- Polished Stainless (Standard) - Matte Black Liquid Ceramic
Engraving	Professionally Laser Engraved Per BATFE Regulations
Optional Accessories	Three Lug Assembly/Disassembly Driver Tool Two (2) Recommended (Refer to DISASSEMBLY AND CLEANING INSTRUCTIONS)
Full Auto Rated	Yes, Rated For Moderate Monitored Full Auto Use See QUEST Frequently Asked Questions #3
PURCHASING RESTRICTIONS	A SUPPRESSOR IS AN NFA FIREARM AND MUST SHIP TO A CLASS 3 DEALER IN YOUR STATE. SEE SUPPRESSOR PURCHASING REQUIREMENTS AND GUIDELINES. SUPPRESSORS CAN NOT SHIP TO INDIVIDUALS!