ELITE22 PRECISION MACHINED REPLACEMENT 10/22 RECEIVER by: Tactical

~~$179.99~~
$159.99

ELITE22 PRECISION MACHINED REPLACEMENT 10/22 RECEIVER

- Can we ship this to your State: Check

PART# sm6rec

ELITE22 PRECISION MACHINED REPLACEMENT 10/22 RECEIVER

Click to enlarge

In response to customer demand for a high quality target grade precision machined replacement receiver for building a custom 10/22 rifle at an affordable price, serious target shooters, varmint shooters, as well as plinkers can enjoy the advantages of a machined receiver with a solid Picatinny mount that can be built into whatever level of precision is required. Our ELITE22 replacement receiver is loaded with the features that easily separate it from a factory receiver while still being able to use factory parts to complete it.

Ruger & 10/22 Are Registered Trademarks of Sturm Ruger
1. RECEIVER PRECISION MACHINED FROM AIRCRAFT GRADE BILLET ALUMINUM
	The ELITE22 Replacement 10/22 Receiver starts as a 1 1/2 pound solid billet of 6061 T6 aircraft aluminum. Extensive CNC machining converts the solid block into an 8.3 ounces precision receiver that does not have the rougher surface finish and casting imperfections that a cast receiver would frequently include. All dimensions of the receiver are held to close tolerances for reliable consistency. We offer a variety of Ruger 10/22 Accessories to compliment your custom built rifle, such as Replacement Barrels, TI25 Machined Aluminum Mags, TI25 Advanced Composite Mags as well as Stocks and Flash Hiders.

2. CLEAN FROM THE CHAMBER TO THE MUZZLE

Target shooters have always known that the correct way to clean a rifle is from the chamber and out the muzzle rather than pushing all the dirt from the barrel into the receiver and potentially damaging the barrel crown with the cleaning rod. Our receivers have a 1/4" hole in the rear of the receiver that allows you to put a cleaning rod in the rear of the receiver, then attach the brush and swab the barrel from the chamber to the muzzle without having to remove the barrel (and loose your zero each time). The cleaning access hole is cosmetically covered with a snap in and out plug that blends with the rear of the receiver when installed and that is completely hidden when the receiver is in the stock.

3. PICATINNY PRECISON MACHINED RAIL

Rather than put a lesser quality cast rail on a precision machined receiver, our Picatinny rail is also machined from solid billet aluminim. Just to make sure that you can put any accessory you want on your custom rifle, we provide a Picatinny mount as standard rather than the less versatile weaver style rail. The rail is mil-spec to fit popular scopes and accessory optics such as Eotech sights. It is hard black anodized to match the receiver.

4. FOUR MASSIVE #10 CAP SCREW RAIL ATTACHMENT

We HATE small cheap slotted screws for securing a rail to a receiver. Our machined Picatinny rail is secured to the receiver with FOUR #10 cap screws to ensure a solid, reliable mounting platform that is easy to install and remove without having to worry about stripping small screws or damaging tiny threads in the receiver.

Compare our rail and mounting screws (in the picture to the right) to the factory scope mount and screws. The rail, the screws and the receiver are engineered to work precisely work together. Once you try this mounting system, you'll appreciate the advantage of having real hardware to mount your rail to the receiver.

5. HARD ANODIZED AND PROFESSIONALLY LASER ENGRAVED

The receiver is matte finished for durability and appearance and is professionally hard black anodized. Anodizing is not a paint or a spray on finish, its a molecular change in the surface of the aluminum that forms crystals (like diamonds) on the outside of the material. Its the same finish that space and defense contractors and the military require on their parts.

To compliment the matte black anodized finish, each suppressor is professionally laser engraved in compliance with BATFE marking requirements, indicating its serial number, model and manufacturer information. Laser engraving costs a few dollars more than traditional rotary engraving, but anything less looks like it. The ELITE22 Receiver delivers in appearance and performance at a value cost.

6. IF OUR NAME IS ON IT, WE MAKE IT AND SERVICE IT

Many other "manufacturers" put their name on a product that they don't manufacture. Our ELITE22 Receiver is CAD designed and CNC manufactured in our modern CNC machine shop out of USA made aluminum. We are intimately familiar with its function, assembly and operation and are committed to providing shooters with a product that meets or exceeds their expectations.

We operate a fulltime firearms and related accessories CNC manufacturing machine shop with live customer service and have the parts, the staff and the experience in-house to service and troubleshoot our products, resulting in fast turnarounds and hassle free service for you, our valued customer. As always, we appreciate your business!

PRODUCT SPECIFICATIONS
PRODUCT MODEL	ELITE22 PRECISION MACHINED REPLACEMENT 10/22 RECEIVER
Manufacturer	Tactical Innovations Inc.
Caliber	Rated for .22LR Only
Material	6061 Aluminum
Manufacturing Process	Precision Machined From Billet
Weight	8.3 Ounces - With Rail & Screws
Finish	Matte Black, Hard Anodized
Engraving	Professionally Laser Engraved Per BATFE Regulations
Included Accessories	- Picatinny Rail, Precision Machined - Rail Mounting Screws (4) - Bolt Buffer
PURCHASING RESTRICTIONS	A RECEIVER IS A FIREARM AND MUST SHIP TO AN FFL DEALER IN YOUR STATE. RECEIVERS CAN NOT SHIP DIRECTLY TO INDIVIDUALS!

* Rifles shown are for reference only and are NOT included with the stripped receiver

Quantity:

Customers who bought this product also purchased

OFFSET V-BLOCK FOR COHORT™, ELITE22™, 10/22® & CHARGER™ - BLUE OR STAINLESS STEEL	CAP SCREWS FOR V-BLOCK BARREL TO RECEIVER MOUNTING	4 POINT STAINLESS THROWING STAR W/ CASE
REAR DETENT CAPTURE SCREW	BOLT ASSEMBLY FOR SARCK AR15 .22LR CONVERSION KIT	T15BDX UPPER AND LOWER RECEIVER COMBO WITH STAINLESS TAKE DOWN PINS