The Clip Draw is the perfect holster alternative. Its a no-nonsense improvement for concealed carry. Easy to install or remove, positions your gun to lay flat and virtually disappears under a shirt or jacket. Weighs just 1 ounce and is just .035 inch thick. Fits Glock models 20,21,21SF,29,30,30SF,37,38,39
Made from specially tempered spring steel with black oxide coating. The Clipdraw comes with a slide cover plate that replaces the original and is drilled and tapped for attaching the Clipdraw (see installation instructions below).
Glock Installation Instructions
Following the instruction in your Glock owners manual, remove the slide from the frame then separate the barrel and recoil spring assembly from the slide. Following the instructions provided with your Clipdraw, remove the slide cover plate located on the rear of the slide. Install the drilled and tapped slide cover plate provided with your Clipdraw. Mount the Clipdraw on either side of the slide with the screws and allen wrench provided.
CAUTION
Do not carry the pistol in the ready to fire condition. This is not the recommended safe-carrying method for civilian use. To minimize risk of unintentional discharge, load live ammunition into the pistol only when you are ready to shoot.
* Reprint from the Glock owners manual
Review This Product Close
