AR15 FLAT TOP UPPER RECEIVER FORGING
UNRESTRICTED AR15/M16 upper receiver forging is military spec 7075 heat treated T6
alloy and is the basis of our precision machined finished upper receivers. There
are NO holes, machine work or any other work done on the
These lower receiver forgings are great for the "do
it yourself-er" that wants to machine the receiver for a project, for
customers that want to stock up for the future or for anyone that wants
a cool paperweight. If you have the ability and the time, these make a
good project and a fine upper receiver when finished.
FREQUENTLY ASKED QUESTIONS:
1. Does the forging come with a machinist drawing? - No drawing is available.
If I have questions on how to machine it etc., can I call or email you
for assistance? - No machining assistance is available.
3. Is discounted pricing
available for quantity purchases? - Yes please contact us for any order over 100.
4. Can you make and sell a forging with some modifications? - No.
Dereck PettittKing, NC
I ordered an upper/lower forging combo and then another single upper because the uppers don't seem quite as difficult to finish as the lower receiver. The casting is pretty much dead on...The 'A' marking and the line marking around the bolt cam area are cleanly cast and visible, so although it would be easier than a manual mill, you don't necessarily need a CNC machine to finish one of these. I'm figuring complete finishing will require some special bits like a slot cutting bit (for the charging handle slot), thread milling bits (for the barrel nut thread - manual machine users will have to find other ways to cut the threads), and perhaps dovetail cutter (for the picatinny rail - but other methods could be used to cut the angles).
This is a neat novelty item or good for a side project, but I definitely wouldn't buy these thinking you can save money by doing it yourself. Remember there's a very good reason a finished upper cost much more than one of these forgings!
|Was this review helpful?yesno
||5 found it helpful | 5 did not