Restricted item

Checking...

Yes... We can ship this to {{ stateToCheck }}.

No... We cannot bill or ship this to {{ stateToCheck }}.

Invalid request or service not available. Please try again.

AR15 / AR10 FLASH HIDER .30 CALIBER A2 "PARTIAL CAGE" FOR 308 WIN / 300 BLACKOUT / 300 WHISPER / 300 ARROW

AR15 / AR10 FLASH HIDER .30 CALIBER A2 "PARTIAL CAGE" FOR 308 WIN / 300 BLACKOUT / 300 WHISPER / 300 ARROW

Flash Hider A2 style "Partial Cage" threaded 5/8 - 24 TPI, heat treated hardened blued steel for threaded barrel AR15 / AR10.  Partial cage flash hiders are the latest version that has one "port" left solid, which should be oriented at the 6 o'clock position (the bottom) when installed using a crush washer (not included).  The solid bottom forces the muzzle blast out the top and sides to decrease muzzle climb to allow the shooter to remain on target during rapid fire. 

This A2 Partial Cage Flash Hider is proudly made in the USA.

  • Heat treated 4140 steel.
  • The quality is as amazing as the pictures look.
  • Best on the market. 
  • Recoil compensator.
  • Threaded Right hand 5/8 - 24 threads per inch. 
  • Washer sold separately.
  • A2 has pockets half way around to double as a flash hider / recoil compensator.
  • PRODUCT NAME AR15 / AR10 A2 "PARTIAL CAGE" FLASH HIDER
  • MANUFACTURER Tactical Innovations Inc. Bonners Ferry, ID 83805
  • APPLICATION AR15 / AR10 .30 Caliber Rifles Such as 300 Blackout, 308 Winchester / 7.62x51, 300 Whisper, 300 Arrow,
  • CONSTRUCTION Heat Treated Steel
  • FINISH Hot Salt Blued
  • ID THREAD 5/8 - 24 TPI
  • DIMENSIONS - Length
    - OD (Outside Diameter)
    - Weight
  • COUNTRY OF ORIGIN Proudly Made in The USA

Review This Product

Frequently Asked Questions For

AR15 / AR10 FLASH HIDER .30 CALIBER A2 "PARTIAL CAGE" FOR 308 WIN / 300 BLACKOUT / 300 WHISPER / 300 ARROW

  1. What is the difference between a FULL CAGE and a PARTIAL CAGE flash hider?
  2. How do I know if this A2 PARTIAL CAGE FLASH HIDER will fit on my firearm?
  1. What is the difference between a FULL CAGE and a PARTIAL CAGE flash hider?
    The full cage flash hider has gas ports at all positions around the flash hider. The partial cage flash hider does not have a port for the bottom of the flash hider. When the full cage is installed, it is not necessary to orient it to the rifle since the muzzle blast is vented and dissipated equally in all directions. However with the partial cage flash hider, it must be installed using a crush washer and torqued so that the solid bottom of the flash hider is at the 6 o'clock position (the bottom) when tightened onto the rifle.
  2. How do I know if this A2 PARTIAL CAGE FLASH HIDER will fit on my firearm?
    You will have to have a 30 caliber firearm that is threaded 5/8 - 24 TPI. If you are unsure of your firearm's threading, you should contact the manufacturer of the firearm for clarification.
PROP 65 WARNING: This product can expose you to chemicals including lead, which are known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.