10/22® FAKE SUPPRESSOR
(DISPLAY SILENCER)
- NO ADAPTER REQUIRED

Attention

  • This fake suppressor is ONLY for NON-THREADED 10/22® TAPER barrels with a front sight and will NOT fit other makes or models.

    If you want a fake suppressor for a 10/22® with a 1/2-28 threaded barrel, you would instead want part # 00237.

10/22® FAKE SUPPRESSOR (DISPLAY SILENCER) - NO ADAPTER REQUIRED

Want the suppressor look for your factory taper barrel Ruger 10/22 rifle without all the paperwork hassle and transfer tax expenses? Our .22 LR 10/22 Fake Suppressor is as close to a real suppressor as you can get without paying the tax stamp. Its CNC precision machined from solid aluminim with a durable hard black anodized finish and its professionally laser engraved identically to our real NFA registered suppressors.

Since its a fake suppressor, the sound is not reduced and bullet impact is not changed. Many customers do prefer the weight and balance improvement that the suppressor provides. Its perfect for use on a Ruger 10/22 rifle with a factory taper barrel (not .920 bull barrels).

Don't let the low price fool you... We are the source and manufacture 1000's of fake suppressors to supply other major manufacturers, distributors and resellers. You won't find a better fake suppressor at ANY price. 

Order one today and get your gun lookin' right!

 

Of course the Ruger 10/22 that is shown in the picture is for reference only and is not included.

  • PRODUCT NAME RUGER 10/22 FAKE SUPPRESSOR(FAKE SILENCER)
  • MANUFACTURER Pike Arms Inc.
  • CALIBER .22LR Only
  • APPLICATION Ruger® 10/22 Rifle with factory taper barrel (NOT .920 Bull Barrels)
  • DIMENSIONS 5.000 Inches Long x 1.000 inch Nominal Diameter
  • WEIGHT 4.7 Ounces
  • MATERIAL Aircraft Grade Aluminum
  • FINISH Cerakote Black
  • MOUNTING Slip over muzzle around front sight, set screws to secure fake suppressor to barrel.
  • RESTRICTIONS Not federally restricted. Not for sale where locally restricted or otherwise regulated. Verify state and local regulations and restrictions, if any, prior to ordering.

Overall Rating: 4.6 out of 5 5 reviews

Review This Product

By Steve Of Texas
This fake suppressor is better than any flash hider if you want your gun to look all tactical. It was easy to install, it was more than I figured I'd get for that price and shipping was fast. I'm a repeat customer.
By Stacey Of Minnesota
All my friends think I have a silencer. For $35 bucks its worth every penny just for dressing up my rifle. I don't have all the other fancy updates yet (but saving up for them) but this fake suppressor should be the first update you do to any rifle. How about a commission (HINT HINT) for sending my friends your way for some business cause they are ordering one too?
By Chris Of Washington
AWESOME SUPPRESSOR!!!!!! to make it even a little bit more quiet shoot the CCI long rifle rounds.
By Steven Of California
It's ok When I got It ,it only came with 1 screw so it kept falling off If you could buy replacement screws I would give it 5 stars
By Allen Of Texas
I bought this to add to my Ruger 10/22 that I installed an archangel kit on, Perfect fit makes the rifle look great, I have had a lot of remarks on the way it looks and inquires about where to get one. Great product would buy again if I get another 10/22

Frequently Asked Questions For

10/22® FAKE SUPPRESSOR
(DISPLAY SILENCER)
- NO ADAPTER REQUIRED

  1. Does this fake suppressor come apart? Can I break the welds, cut it open etc.? Can this fake suppressor be disassembled for cleaning? Do the endcaps come off? Etc Etc...
  2. What is the difference between a real suppressor and a fake suppressor?
  3. Can this fake suppressor easily be converted to a real suppressor?
  4. Can anyone legally own a fake suppressor?
  5. Can I still use my iron sights or will I have to use a scope?
  6. Will the fake suppressor affect my accuracy?
  7. Can I shoot my fake suppressor on other .22LR firearms?
  8. The fake suppressor looks great, but how can you sell it so inexpensively compared to other companies?
  9. Can I get a fake suppressor with custom engraving?
  10. Are your fake suppressors available in additional colors other than black?
  11. Can I shoot calibers other than .22LR through it?
  1. Does this fake suppressor come apart? Can I break the welds, cut it open etc.? Can this fake suppressor be disassembled for cleaning? Do the endcaps come off? Etc Etc...
    This FAKE suppressor can NOT be disassembled for any reason. It's solid. If it could be disassembled, it would be too easy for criminals to illegally attempt to construct an unregistered illegal suppressor. As a result, ATF would not allow the sale of a fake suppressor that could be disassembled.
  2. What is the difference between a real suppressor and a fake suppressor?
    Fake suppressors are the same as a barrel extensions. Since they don't make the shooting any quieter, they are not federally restricted. A real suppressor actually decreases the sound of the firearm when discharged and is therefore subject to ATF regulations.
  3. Can this fake suppressor easily be converted to a real suppressor?
    Of course not... Suppressors (silencers) are NFA restriced firearms and must transfer in strict compliance with federal, state and local regulations.
  4. Can anyone legally own a fake suppressor?
    Fake suppressors are an accessory. They are not federally restricted. Fake suppressors are the same as a barrel extension They don't make the shooting any quieter. However, state and local regulations might prohibit purchase or possession. Check state and local regulations to ensure compliance prior to ordering.
  5. Can I still use my iron sights or will I have to use a scope?
    The fake suppressor will allow you to still use your iron sights or you can use a scope, which ever you prefer.
  6. Will the fake suppressor affect my accuracy?
    The fake suppressor should have minimal to no change on the impact of the bullet as compared to shooting with no fake suppressor for general recreational target shooting. The additional weight on the barrel will change how the barrel flexes and vibrates when fired, which could minimally change your point of impact. For general plinking, just shoot it, but before using the suppressor for hunting or other "serious" target shooting, you should re-sight the firearm with the suppressor installed to compensate for any differences.
  7. Can I shoot my fake suppressor on other .22LR firearms?
    This fake suppressor is specifically manufactured for the Ruger 10/22 factory taper barrel and will most likely not fit other .22LR rifles or pistols.
  8. The fake suppressor looks great, but how can you sell it so inexpensively compared to other companies?
    We manufacture literally 1000s of fake suppressors in quantity runs and make our profit based on volume. We don't spend thousands of dollars on advertising and rely primarily on your satisfaction and referrals, and we pass the savings on you to. Dollar for dollar for price, performance, workmanship, customer service and company reputation, you will not find a better value for your money.
  9. Can I get a fake suppressor with custom engraving?
    We do not offer any custom engraving at this time. Your local trophy shop should be able to provide custom engraving if you need it.
  10. Are your fake suppressors available in additional colors other than black?
    Based on customer demand, black with white laser lettering is the only option available at this time.
  11. Can I shoot calibers other than .22LR through it?
    Although many customers have had good experiences using their fake suppressors on firearms of calibers other than .2LR by using common sense and good judgment, the fake suppressor is not rated for any caliber other than .22LR. Other calibers will have varying pressures and could damage the fake suppressor and / or cause personal injury to the shooter or bystanders, and therefore their use is not recommended and they should not be used. Safe firearm handling and use would preclude the use of any firearm or suppressor with ammunition other than that for which it was designed.

INSTALLATION INSTRUCTIONS

Installation is fast and easy and requires no tools or gunsmithing.

1.  Ensure firearm is NOT loaded. 

2.  Slide over muzzle, aligning FAKE SUPPRESSOR with front sight until completely seated.

3.  Using supplied allen wrench, tighten both set screws to securly mount FAKE SUPPRESSOR to barrel.  Do not over torque and strip the set screws. 

CLEANING INSTRUCTIONS

1.  Ensure firearm is NOT loaded. 

2.  Loosen both set screws that secure the FAKE SUPPRESSOR to the rifle.  Gently remove FAKE SUPPRESSOR by sliding FAKE SUPPRESSOR off of barrel.

3.  Remove lead and carbon from inside of FAKE SUPPRESSOR using pistol cleaning bush and bore cleaner. 

4.  Lightly oil exterior with soft cloth to remove dirt and dust.

PROP 65 WARNING: This product can expose you to chemicals including lead, which are known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.